The Perma Piazza is the latest permeable paver creation by Rinox. This ecologically friendly paving stone system allows water to flow directly down through the system minimizing storm water runoff. This product has an average void size of 5.3%, and when installed on an open graded base with AquaStone 5 in the paver joints, it will allow high volumes of storm water to pass directly through it. This not only reduces storm water pollutants from collecting in parking areas and running through drainage pipes, it can also reduce the cost of traditional storm water infrastructure up to 15%. The Perma Piazza is ADA-compliant and has a tight interlock when installed in a herringbone pattern that will minimize the possibility for any shifting from vehicular traffic.
| Perma Piazza Average Permeability Rates |
Rate
(Iches/Hour) |
Capacity
(Gallons/Minute) |
Capacity
(Gallons/Hour) |
| 937.29* |
8.28* |
496.61* |
| * Paver permeability is dependent upon subsurface conditions, i.e. soil, permeability rates, subbase storage, etc. |
|
|
Permeable Paver Setting Bed
(2" depth, #8 Clean Stone) |
| 17 lbs. +/- per sq.ft.
|
| 170 lbs. +/- per 10 sq.ft. |
| 1700 lbs. +/- per 100 sq.ft. |
| Derived from calculations using 91.5 lbs. per cu.ft. of loose #8 Clean Stone/115.45 lbs.per cu.ft. rodded (Compacted). |
|
The Perma Piazza system is uniquely cast in a herringbone pattern on each layer of the pallet. This feature enables the mechanical installation of the product, reducing labor costs and increasing productivity. Mechanically installed paver systems can exceed three times the daily square footage completed when compared to traditional installation methods.
Take a look at our Perma Piazza infiltration test to see a demonstration of how these permeable pavers work.
Technical Specs
PCS. per SQ. FT.:
4.5
PCS. per SKID:
360
SQ. FT. per SKID:
80
Layers per SKID:
8
SQ. FT. per Layer:
10
WEIGHT per SKID:
3225 lbs.
Projects Featuring Perma Piazza: